Follow the Series 10.5.2 to 10.5.3
10.5.3 to 10.5.4
10.5.4 to 10.5.5
Dont jump the order.
-------------------------------------------------------------------------------------------------
1. Use this guide for update your 10.5.1 , 10.5.2 systems.
.
2. For 10.5.3 peoples you need nothing just open package and it will work for u.
.
3 . If you are on 10.5.4 and update to 10.5.5 again follow this guide.
.-------------------------------------------------------------------------------------------------
Open Terminal
sudo -s
*type password*
while sleep 1;
do rm -rf /System/Library/Extensions/AppleIntelCPUPowerManagement.kext; done
Open 10.5.5 Update Installer
Run update BUT DO NOT RESTART
Go back to your terminal and press Control C to end the script
In terminal type:
nano /System/InstallAtStartup/scripts/1
Replace the line Dont Steal Mac OS X.kext with dsmos.kext
Restart and boot with -v
-------------------------------------------------------------------------------------------------
It will start loading and then you will get the message MACH_REBOOT, there you can hard reboot your computer. When you reach the darwin boot screen again, boot with -v again just for safe measure and it will boot fine.
Enjoy.
Thanks to netkas.org for his valuable work.
Related Articles :
1 Partitioning Demystified for Linux User...
.
2 Partitioning Demystified for Windows User.
.
3 Add OSX int XP Vista Grub boot-loader's.
.
4 Dual boot Vista & OSX guide on same drive.
Download 10.5.5 update for leopard here.
56 comments:
Is this amd 64 safe or it will ruin my system.
ths
em
Please mention your Distro , Current version.
Read the guide twice or thrice this is only method for updating your OSX86 leopard.
Backup your system with Time-Machine. Try this many more done it sucessfully.
Sorry,
It is kalyway's10.5.2 version.
Original emach T 6542 with upgraded video card 8600 gt and power unit
em
When I follow this guide in an iATKOS v2.0i distribution the system restart over and over again (about 2 sec. after the Darwin boot screen). Any suggestion?
emin wait for kalway patched update.since u r on AMD so you dont try to update.
Wait & Watch OSX86 community.
bend3r tell me what u done step by step what is your distro, version system information, if u are on AMD it doesn't work for u. Sorry i don't mentioned in guide that this is only for INTEL pc.
waiting for your reply.
Hi everybody
I'm trying to made update of my MAC OS X86 10.5.2 but when installing, the installer told me that i can't install it cause: "This volume does not meet the requirements for this update"
Any Idea?
Thank you
Sorry i downloaded the wrong file.
We should download the combo update.
Thank you everyone
Anonymous Thanx for showing interest in my blog.
What i want to clarify to you is that you are on 10.5.2 so update to 10.5.3 first and then to 10.5.4 then try to 10.5.5 you can't jump out of sequence.
Happy Hacking..........
Digg it it is must.............
i tried, but now i can't boot.
i get a kernel panic:
"Unable to find driver for this platform: \"ACPI\".\N"@/SOURCECHACHE/XNU/XNU-1228.7.58/iokit/Kernel/IOPLATFORMEXPERT.CPP:1407
Possible to fix this? tnx!
Mention your Distro current version.
i think u must check
1 ACPI Enabled or Disabled in your BIOS setting.
2 Use "-v -x -f" boot flags. Trying to boot into installed system now..
3 I think you are using vanilla kernel (original from apple) without EFI pach installed, don't you?
Ah, i had Kalyway 10.5.2 installed. Stupid me.
EFI was installed btw.
Do i need to re-install osx completely now?
tnx, micha
I have Kalyway 10.5.2 Installed and no way of backing up my system using time machine.
I am on a Core 2 Duo, using Apple's Vanilla Kernel, i read somewhere that i can directly update my system through apple's system update.can i ?
also, will the above method be safe so that i dont lose my data.
Except direct update from apple you can do evry thing.
You are on 10.5.2 so first of all update to 10.5.3 kalyway patched update.
a 10.5.3 can be updated to 10.5.4by apple upate directly without any modification but from 10.5.4 to 10.5.5 again follow this guide.
Time machine works fine on hackintosh.
i downloaded the combo update. should i follow your method above and directly update to 10.5.5 from my 10.5.2.
The update you downloaded that is for 10.5.4 to 10.5.5 but you are on 10.5.2 so first of all you have to download 10.5.3 kalyway patched combo update find it on any popular torrent site.
then update to 10.5.4 without any modification after now u are able to update 10.5.5 this is only procedure for updating.
don't try to update 10.5.2 to 10.5.5 directly..........
I'm using iAtkos 10.5.4 (fresh install) with no modifications except for LAN support (ViaRhine).... Now I want to upgrade to 10.5.5 using this guide. Shall I update using the System Update or the downloadable?
ben
Yes you can if you are on INTEL system then this is the only procedure for updating your hackintosh.
Meanwhile pcwiz introduced their new tool for automatic updating and some more feature's......
Check out the following link.
http://ihackintosh.blogspot.com/2008/10/osx86-tools-10-final-version-released.html
Digg is must/.
The only problem I have:
audio,network,and quartz no longer work. Do I need new drivers?
I'm using Leo4allv3 10.5.2
-oddly enough my cpu reads 4ghz now.
Find your driver on insanelymac forum.
dont use search of forums use google it'll give you better result.
For eg. if you want to find realtek 8161 google following string
Forum.Insanleymac:Realtek 8161
i am trying to update 10.5.d.x to 10.5.5
and i can't find the path /System/InstallAtStartup/scripts/1 in my system
where i am supposed to Replace the line Dont Steal Mac OS X.kext with dsmos.kext
Can anyone Help ?
Thanks in advance.
Hi Nick Tracing your problem Chet below it'll help you surely.
Type this in Teminal
CODEopen -a TextEdit [enter]
In TextEdit Open the
file /System/InstallAtStartup/scripts/1
Modify the line
CODE/System/Library/Extensions/Dont Steal Mac OS X.kext
to
CODE/System/Library/Extensions/dsmos.kext
Save the file.
That's it....................
and i don't have in my system that
path of file at all
file /System/InstallAtStartup/scripts/1
i search for that but is not appear in my system
when i try to type the line you give me
CODEopen -a TextEdit
i got a error command tot found
in my system i only have inside System a directory with name Library and inside that one is not any directory with name InstallAtStartup
so what i do then ?
the previous commands worked for me
Open Terminal
sudo -s
*type password*
while sleep 1;
do rm -rf /System/Library/Extensions/AppleIntelCPUPowerManagement.kext; done
Open 10.5.5 Update Installer
Run update BUT DO NOT RESTART
Go back to your terminal and press Control C to end the script
and the problem seems to be that path of file i dont have at all
First of all tell me how you proceed.
I assume you are on intel architecture.
10.5.2 to 10.5.3
10.5.3 to 10.5.4
10.5.4 to 10.5.5
Don't try to jump the order.
Open Finder and navigate to /System/Library/Extensions/
Open Terminal
Type CODEsudo -sin Terminal
CODE {password} [enter]
Copy paste this in to Terminal
CODEwhile sleep 1; do rm -rf /System/Library/Extensions/AppleIntelCPUPowerManagement.kext; done [enter]
Open the .dmg UPDATER file and install
When the install finishes DO NOT click REBOOT!
Go back to your Finder window and make sure AppleIntelCPUPowerManagement.kext is not there.
Go back to the Terminal and do Ctrl + c
Type this in Teminal
CODEopen -a TextEdit [enter]
\
In TextEdit Open the file /System/InstallAtStartup/scripts/1
Modify the line
CODE/System/Library/Extensions/Dont Steal Mac OS X.kext
to
CODE/System/Library/Extensions/dsmos.kext
Save the file.
Write in detail.
Anonymous said...
when i try to type the line you give me
CODEopen -a TextEdit
i got a error command not found.
Don't Panic.......
You need to sudo -s in terminal so that when textedit open you will have the right to modify the file.
This will give's you to access all system files.
Hello,is this tutorial only for vanilla installed kernels or for non-vanillas as well?
Mine is Kalyway 10.5.1 running on P42.8Ghz, MBR efi, non-vanilla kernel
Thanks in advance.
hi allan
i don't have experience with non vanilla kernel's but i found a link you can try this.
http://forum.insanelymac.com/index.php?showtopic=113382
Thanx for showing interest
Hi,
I used this guide on fresh install Kalyway 10.5.2 and it restarts over and over. I am using Intel P4 but when I installed it and check info it says Processor unknown but it gives the speed. also I followed the guide step by step.
hello G.
you don't mention about package u used to update.
this problem occur's when u select a wrong package.
you must use 10.5.2 to 10.5.3 kalyway patched combo update find it on any good torrent engine.
Ahhh thats why because i used the 10.5.5 combo update on fresh install kalyway 10.5.2
Hi,
I would like to know if the Osx86 I installed is loading the vanilla kernel and I have another kernel installed like the sleep 9.2.0. How can i change it to use that?
Thanks
I have a nice guide on how to upgrade kernel in osx86 copy the link in browser and you will be there.
http://ihackintosh.blogspot.com/2008/10/how-to-upgrade-kernel-in-osx86.html
just did this and thanks for the InstallAtStartup script tidbit too. worked like a charm! 10.5.5 update np. THANKS
I have successfully installed the 10.5.3 using the kalyway combo update,
How to upgrade it to 10.5.5.
Should I just Download 10.5.5 combo update and
Open Terminal
sudo -s
*type password*
while sleep 1;
do rm -rf /System/Library/Extensions/AppleIntelCPUPowerManagement.kext; done
Open 10.5.5 Update Installer
Run update BUT DO NOT RESTART
Go back to your terminal and press Control C to end the script
In terminal type:
nano /System/InstallAtStartup/scripts/1
Replace the line Dont Steal Mac OS X.kext with dsmos.kext
Restart and boot with -v
hi G
Now you are on 10.5.3 so find link of 10.5.4 update from apple you don't need any modification just install it without any change or command just run the package and relax.
After 10.5.4 update download 10.5.5update and again follow this guide.
My pc is restarting after update over and over and over again ;(
i updated from iatkos 10.5.4
Do you follow the procedure step by step. From where you download the update.do you Modify
CODE/System/Library/Extensions/Dont Steal Mac OS X.kext
to
CODE/System/Library/Extensions/dsmos.kext
yes i do
i tried twice
i downloaded mac combo update from apple website
Hi , I just installed the 10.5.4 on the same way you said and it started to restart again and again I tried using -x -f -v then -x -v no good T_T
is that because i have an sse2 machine?
Please help!
Hi there I am newbie and are trying to get this working. I am quite sure I am doing something wrong.
1.
I have installed KalyWay 10.5.2 and this works great.
2.
I would like to upgrade to 10.5.5 so as I can read i need to update to 10.5.3 then 10.5.4 and last 10.5.5.
So i have downloaded Kalyway combo update and first i go to the terminal and type exact:
while sleep 1;
do rm -rf /System/Library/Extensions/AppleIntelCPUPowerManagement.kext; done
And then hit Enter. I am not sure the script is running but I can't find more information concerning this.
Then I install the first part of the combo update. The installation finish and I now want to stop the scrip from the terminal but I get a gray screen saying
'You need to restart your computer. Hold down the Power button for several seconds or press the Restart Button'
When i get this information on the sceen i can not do anythink the mouse, keyboard is disabled so I need to restart and then nothing happens..
So I must restall Kalyway 10.5.2 again..
Can anyone help me???
Thank you..
Snowman
Hi Lars
kalyway hackintosh10.5.3 combo update for sse3 intel only !
READ Carefully !!!!
1- install comboupdate ! don't restart !
2- install kalyway kernel pkg ! choose kernel you need for your pc ! (if you want keep your old 9.2 kernel so install this pkg without selecting 9.3 kernel !!!)
3- reboot and type update -v and cross the fingers !if you stuck at bsd root after reboot ! so type "update -v" without quote at f8 darwin prompt ! it should work !caution :
you may experienced boot problem related to gfx card ! especially with 7xxx nvidia series and ati ! if happen type -v -x
Hi Vinay,
Yes but the problem is when i have installed the first part of the combo update and all is finished and the restart button apear, (I do not click this one) then after one second there is sliding a gray screnn in the front saying:
'You need to restart your computer. Hold down the Power button for several seconds or press the Restart Button'
And when this message apear the mouse and keyboard is disabled.
Then I can do nothing.
Do you understand my problem?
yboard & mouse freeze than you can only try force restart & see what happens what is your system configuration.which graphic card do you have.
Hi Vinay,
Sorry about my poor formulation, I will try one more time.
When the installation complete first part of Kalyway combo update, then one second later there slide a transparrent window in the front. This window has this information.
'You need to restart your computer. Hold down the Power button for several seconds or press the Restart Button'
Do you understand my problem?
Dear Lars.
Your keyboard & Mouse freeze's for restart you dont need these.
Just press & hold power button which is in front of your pc cabinet along with restart button.or press restart button from pc cabinet manually.
Got it..........
Hi Vinay,
I know how to restart my PC. But I do not wich that, i need to install the second part of the Kalyway combo update before restarting. My problem is I can not because the Keyboard and mouse gets disabled when the gray transparent screen apears.
My question is, why do I get the Gray screen, is ther a work around?
Hi! Sorry, but in my .../Scripts/1 I cant find hobody "Dont Steal Mac OS X.kext". What code must be whith this .kext in line? I have not it. dsmos.kext startind on reboot, but errors and errors...
Do you help me?
I have a Dell XPS m1730. I installed using iAtkos 10.5.4 DVD. I installed checking the following boxes to customize.
iATKOS v4i Main System
Darwin Bootloader
Stock Files
AppleACPIPlatform.kext
Kernel 9.4.0
Drivers
VGA
nVidia
Nvinject
256MB
512MB
nVidiaLaptop
System
SATA
Using the above settings I was able to successfully boot to the OS X desktop.
I then attempted to update to 10.5.5 using the below guide (there are notes in * * next to problems I had):
Open Finder and navigate to /System/Library/Extensions/
Open Terminal
Type sudo -s in Terminal
{password} [enter]
Copy paste this into Terminal
while sleep 1; do rm -rf /System/Library/Extensions/AppleIntelCPUPowerManagement.kext; done [enter]
Open the .dmg UPDATER file and install
When the install finishes DO NOT click REBOOT!
Go back to your Finder window and make sure AppleIntelCPUPowerManagement.kext is not there.
*It was not there.*
Go back to the Terminal and do Ctrl + c
Type this in Teminal
open -a TextEdit [enter]
*TextEdit did not open. Opened the file using nano.*
In TextEdit Open the file /System/InstallAtStartup/scripts/1
Modify the line
/System/Library/Extensions/Dont Steal Mac OS X.kext
*This line was not present*
to
/System/Library/Extensions/dsmos.kext
Save the file.
I then restarted the computer. On the first reboot it automatically restarted, on the second reboot it locked up.
I am able to boot to a desktop if I boot using the option -x. If I go to about this mac it shows "version 10.5.5"
I am not sure what to do at this point. Is there a way to find out why it will not boot into normal mode? Thanks for any help.
Dear chris you are not only one who faced this problem i found an article on insanleymac forum may be it can help you.
http://forum.insanelymac.com/index.php?showtopic=126850
I already have Kalyway 10.5.3 Update SSE3 running on my computer and everything runs fine. It's great.
How would I update to 10.5.5 (for my SSE3 computer) without having to reinstall the whole OS?
I'm new to all this and I appreciate the help.
Thanks.
Hi,
I have a fresh install of Kalyway 10.5.2 on my MSI GX600 laptop. I used the NvinjectGO video drivers and the kabylkernel. I installed the 10.5.3 combo update as you instructed and rebooted twice with the -v command. But now my trackpad and keyboard have stopped working.
hi i update my iAtkos 10.5.1 to 10.5.2 and its restart and restart over and over it's an intel core duo lenovo 3000 c200 help please i did what the tutorial said but when a i tried to save the file it ask me some options and i said... wtf? heeelp
this did not work for me, i tried to apply the 10.5.2 update (downloaded from apple). during the install the script instead of deleting the file started saying "this is a directory", is there some additional flag needed on the rm command to tell it to delete a directory?
i am using kalyway 10.5.1, vanilla kernel on intel, thanks for any suggestion
Post a Comment